These heavy duty mounting plates are perfect for any project requiring connection strength.  Product Features 4mm Thick with M5 diameter screw holes on 20mm spacing Dimensions 60 x 60mm V-Slot series compatible also fits most 2020 extrusion systems 6105-T5 Clear Anodized Aluminum Can be mounted to V-Slot rail using 8 or 10mm screws

This is the awesome little plate for the Mini V linear guide system using the OpenBuilds Mini V Wheels and the Xtreme Mini V Wheels. It's super strong and has a small form factor. This plate has the mounting pattern to allow for end to end mounting that makes up the Mini V system. This opens the door to endless machine creation!  Part Details Dimensions: 50 x 50 x 6.35mm 'thick' 6063-T6 Aluminum Black Anodized Brushed Finish Belt loop side notched for 1/4" belt Recessed Screw holed for post flush mount  Download Models to use in your builds Belt Driven mini V example models Example Build Please note: Other part models in varouis formats can be found in the Resources Parts section of OpenBuilds.com

C-Beam™ Riser Plates C-Beam Riser Plates allow you to add a debris shield/cover (coming soon) to your actuators by raising the mounting surface up above the cover. (Please see pictures and models for examples) Plates come in sets of 2, for your convenience. Mounts with 4 10mm Low Profile Screws (sold separately)     Be sure to download the Example C-Beam riser builds pack from OpenBuilds to use C-Beam in your own Builds! Download Example Models   Download   

This is the V-Slot Spacer Block.  It was specially designed to be used in conjunction with the V-Slot Gantry Plate.   It allows you to raise the V-Slot Gantry Plate up away from the rail 12mm so that you can run transmission components such as a belt drive or threaded rod underneath the V-Slot Gantry Plate.  M5 tapped holes to allow mounting to the V-Slot Gantry Plate.   3 holes that allow for mounting of full size OpenBuilds Wheels. SolidWorks parts are here

These are the V-Slot Gantry Plates.  They are available in two sizes. - Universal (20mm - 80mm) - This plate was designed to fit on all standard V-Slot sizes.  It's a great plate to have and use on your builds! - 20mm - This plate was designed to be used when a smaller, lighter plate is desired on the 20mm side of V-Slot. This plate is great when full size wheels are preferred along with a smaller foot print needed. We want to ensure that we simplify belt clamping so we have incorprated 'Fold-Through' Slots to allow you to easily fold the timing belt teeth back onto themselves and zip tie or clamp them in place.   We have also added two 5mm slots that allow you to attach spacers for 90 degree belt mounts under or on top of the plate as well. This simplifies the overall building process and allows for quick assembly times of motion systems. NOTE: There are a lot of possible mounting configurations for these plates so please be sure to look at all the example model builds. Gantry Plate Only6063-T6 AluminumBlack Anodized Finish3mm~ (1/8") Thick    ** Please note - this plate was designed to be used with V-Slot and is not comptible with OpenRail.     Lead Screw Driven linear actuator example Models Example Build 1 Example Build 2 Belt Driven linear actuator example and Plate Models with the V-Slot Gantry Plate 20mm Version Example Build Download Plate Models   Please note: Other part models in varouis formats can be found in the Resources Parts section of OpenBuilds.com

C-Beam End Mount The C-Beam End Mount Plates are high quality aluminum plates with multiple taps and recessing to ensure easy assembly of the C-Beam Linear Actuator.  A strong 12mm thick aluminum 6061- T5 plate Shiny black anodized for a finished look Recessed screw pockets ensure flush mounts Includes pre-tapped mounting holes for easily mounting a Nema 23 Stepper Motor  Recessed bearing pocket ensures a stable fit for lead screw bearing Use in conjuntion with Low Profile Screws M5*20mm (sold separately)   Be sure to download the Example C-Beam builds from OpenBuilds to use C-Beam in your own Builds!   Be sure to download the Example C-Beam builds pack from OpenBuilds to use C-Beam in your own Builds!     Download Example Models C-Beam Actuator example builds for inspration and use in your own builds!    Download 

This is the Idler Pulley Plate.  It can be used with both V-Slot and OpenRail.   The idea behind this plate is to give you a mountable yet movable plate for your Smooth Idler Pulley.  This works great as it allows you to easily tension your belt. There are a lot of possible mounting configurations for this plate. This design was inspired by Barton Dring of Buildlog.net 6063-T6 AluminumBlack Anodized Finish3mm~ (1/8") Thick   Belt Driven linear actuator example and Plate Models Example Build Please note: Other part models in varouis formats can be found in the Resources Parts section of OpenBuilds.com    

This is the Threaded Rod Plate.  It can be used with both V-Slot and OpenRail.   This is the plate you want when you need the power of Nema 23 Stepper Motors coupled with lead/acme screws for your projects.  The design of this plate allows for many possible mounting configurations. 6063-T6 AluminumBlack Anodized Finish3mm~ (1/8") Thick Download the Lead Screw example build model.

These heavy duty mounting plates are perfect for any project requiring connection strength.  Product Features 4mm Thick with M5 diameter screw holes on 20mm spacing Dimensions 60 x 60mm V-Slot series compatible also fits most 2020 extrusion systems 6105-T5 Clear Anodized Aluminum Can be mounted to V-Slot rail using 8 or 10mm screws

This NEMA 23 stepper motor mounting plate is designed to easily allow modular connection of a Nema 23 stepper motor. You can also combine this plate with the V-Slot gantry plate to make a great Belt and Pinion System. 6063-T6 Aluminum Beautiful Black Anodized Finish 3mm~ (1/8") Thick   Please download the 3D moldel to use in your projects. Check out the lead actuator example build here Have fun with your build!

These heavy duty mounting plates are perfect for any project requiring connection strength.  Product Features 4mm Thick with M5 diameter screw holes on 20mm spacing Dimensions 100 x 60mm V-Slot series compatible also fits most 2020 extrusion systems 6105-T5 Clear Anodized Aluminum Can be mounted to V-Slot rail using 8 or 10mm screws

This is the Motor Mount Plate.  It can be used with both V-Slot and OpenRail.   The idea behind this plate is to give you a mountable yet movable plate for your Nema 14 & Nema 17 Stepper Motors.  This works great as it allows you to easily mount your motor anywhere on the extrusion. There are a lot of possible mounting configurations for this plate. This design was inspired by Barton Dring of buildlog.net 6063-T6 AluminumBlack Anodized Finish3mm~ (1/8") Thick  Belt Driven linear actuator example and Plate Models Example Build Please note: Other part models in varouis formats can be found in the Resources Parts section of OpenBuilds.com    

C-Beam Gantry Plate A gantry plate designed specifily to give a clean and compact look while able to ride inside of the C-beam Linear Rail System using Mini V Wheels.  A strong 6mm thick aluminum 6061- T5 plate Shiny black anodized for a finished look Recessed screw pockets ensure flush mounts Includes pre-tapped mounting holes for C-Beam Riser Plates  Adjustable center hole mount allows for belt actuator configurations  Use in conjuction with either the Xtreme Mini Wheels or the Delrin Mini Wheels.   Be sure to download the Example C-Beam builds pack from OpenBuilds to use C-Beam in your own Builds!     Download Example Models C-Beam Actuator example builds for inspration and use in your own builds!    Download 

These heavy duty mounting plates are perfect for any project requiring connection strength. Product Features 4mm Thick with M5 diameter screw holes on 20mm spacing Dimensions 40 x 18mm V-Slot series compatible also fits most 2020 extrusion systems 6105-T5 Clear Anodized Aluminum Can be mounted to V-Slot rail using 8 or 10mm screws

These limit switch plates mount to V-Slot or compatible extrusion. They give you multiple ways to mount and arrange your switches adjustable along the length of the linear guide. Adjustments are made with just one screw to allow for quick and precise switch engagement. They are super easy to use and there are many examples to use in the included model. - 15x32mm - There are 4 threaded M3 mounting holes to mate a micro limit switch to in either vertical or horizontal position and a elongated M5 hole for slotted extrusion mounting/adjustment - These plates work with the OpenBuilds Part Store Micro Limit Switch.   NOTE: The holes in the plastic of the switch will need to be tapped to M3 size so the included M3 Screws can be used to attach the switch to your project.   Download example models here to use in your own projects

This is the Threaded Rod Plate.  It can be used with both V-Slot and OpenRail.   The idea behind this plate is to give you a universal mounting plate for your projects that require a threaded rod.   There are a lot of possible mounting configurations for this plate. This design was inspired by Shapoko at shapeoko.com. 6063-T6 AluminumBlack Anodized Finish3mm~ (1/8") Thick Compatible with OpenBuilds Nema 17 Stepper Motor. Lead Screw exmaple build models Example 1 - Example 2 Please note: Other part models in varouis formats can be found in the Resources Parts section of OpenBuilds.com

These heavy duty mounting plates are perfect for any project requiring connection strength.  Product Features 4mm Thick with M5 diameter screw holes on 20mm spacing Dimensions 60 x 18mm V-Slot series compatible also fits most 2020 extrusion systems 6105-T5 Clear Anodized Aluminum Can be mounted to V-Slot rail using 8 or 10mm screws

Universal Build Plate.  It can be used with V-Slot, OpenRail and MakerSlide The idea behind this plate is to give you a strong, stable universal mounting platform for your heated build plates. This design was inspired by AlephObjects.com and buildlog.net  6063-T6 AluminumBlack Anodized Finish3mm~ (1/8") Thick Plates Models Build Plate example build Example Build Plate Models Please note: Other part models in varouis formats can be found in the Resources/Parts section of OpenBuilds.com