Belts & Pulleys
Shims & Spacers
Tools and More...
Tools and More..
Molex Microfit Connector Ultimate Kit
This is a complete of all the most popular sizes of Molex Microfit connectors. These are great for wiring things like stepper motors. They can handle the current and will not vibrate or even tug apart without releasing the latch. The current rating is 5A continuous per pin, but on the larger connectors (2 × 3+) you should derate it a little, if all circuits are carrying continuous current at all times. The male side also has (2) clips that allow it to be snapped into a bulkhead. The pins can be crimped using this crimp tool. 1 × 2 Female – Qty:24 1 × 2 Male – Qty:24 2 × 2 Male – Qty:24 2 × 2 Female – Qty:24 2 × 3 Male – Qty:16 2 × 3 Female – Qty:16 2 × 4 Male – Qty:10 2 × 4 Female – Qty:10 2 × 5 Male – Qty:10 2 × 5 Female – Qty:10 Male Contacts – Qty:200 Female Contacts – Qty:200
Ball End Hex Key Set
These are the Allen Wrenches that we use for our builds and they work great! The ball end allows you to get into those hard to reach place at angles while the short end without the ball allows for that extra torque needed to seat the screw. This Ball End Hex Key Set allows for easy access to both the Low Profile Screws as well as Socket Head Cap Screws from angles up to 25 degrees. This tool is a must have for your build so get yours today! Includes 13 pices Sizes 1.27 mm1.5 mm2 mm2.5 mm3 mm3.5 mm4 mm4.5 mm5 mm5.5 mm6 mm8 mm10 mm
Drag Chain 35x15mm x 1000mm (semi-open)
This is drag chain or sometimes called energy chain or cable carrier. This has individual links that only swivel in one direction. Wires and cables are run in inside the links. This allows wiring to be protected when run close to moving parts It insures a minimum bend radius to protect them from fatigue. Each 1 meter piece includes 2 ends. The links snap together so you can shorten or lengthen it. The ends have mounting holes. Additional ends can also be purchased separately. This is handy if you break the standard piece into more than one length. PLEASE NOTE: the drag chain does not include the brackets or hardware needed to mount this to an X-Carve.
3D printer / CNC Mill Brush Set
This is a nice brush set for your projects. The nylon brush is great for use on plastic extrusion 3D printers hot ends. You can quickly brush away any of the sticky debries that sticks to the nozzle while it heated. You can also use these brushs to quickly clean up any webbing that may have ocurred during the 3D printing process. Another use is to clean out the tracks durning a cnc milling project. These little brushes are great to keep a set right next to your machine.