Menu
Descargas

Wheels

Delrin Mini V Wheel™ Qty. 1
The OpenBuilds Mini V Wheel is used in combination with the Mini V Plate for a small form factor linear actuator guide.  They can be used on a variety of projects and are great for use with any V-Slot Extrusion.  Each wheel is carefully milled for consistent high precision and tolerance. Part Details Material - Delrin (black)Dimensions 15.23 OD x 9.974 +/- 0.026 ID x 8.8 'thick'Rockwell Hardness M80Compressive Strengh 63Mpa  Download Model   Other CAD file formats can be found here
29.00 MXN
Xtreme Mini V-Wheel Kit 1 Pieza
Kit de Rueda de uso rudo de policarbonato. The OpenBuilds Xtreme Mini V Wheel is part of the heavy duty Xtreme line of OpenBuilds parts, designed with strength in mind. These Xtreme Mini V's are made from very hard polycarbonate (clear) material which, due to its strong nature, will resist compression and wear and, in turn, leads to better overall precision and strengh for your builds. The Xtreme Wheels are designed to be used as a heavy duty alternative to the Delrin Wheels in applications such as CNC Routers/Mills where force and weight are introduced into the system. So, while the Delrin Mini V Wheels work great for most light load applications, the OpenBuilds Xtreme Mini Wheels can be used for builds where heavier loads are required and less compression in the delrin is desired.  Many of these wheels could be added to a gantry to allow for an even distribution of the load across them. Each wheel is carefully milled for consistent high precision and tolerance. Part Details Material - Polycarbonate (clear) Dimensions 15.23 OD x 9.974 +/- 0.026 ID  x 8.8 'thick' Rockwell Hardness M 75 Compressive Strengh 86Mpa Each Wheel Kit Includes: (1) Xtreme Mini V Wheel (2) Mini V Bearings (V3) (2) Mini V 1mm Precision Shim (1) M5 Nylon Lock Nut Also, be sure to grab the screws and spacers of your choice here: Low Profile Screw (25mm for use with 1/8" Plate and 30mm for 1/4" Plates with the exception of the C-Beam Gantry Plate & Mini V Plate which uses 25mm) Aluminum Spacers (choose between 6mm and 1/4") Eccentric Spacers (choose between 6mm and 1/4") Note: Usually for a standard gantry plate you will need two Eccentric Spacers as well as two Aluminum Spacers The Wheel Only version of this wheel can be found here: http://openbuildspartstore.com/xtreme-mini-v-wheel/ The OpenBuilds Xtreme Solid V Wheel is great for use with the V-Slot Linear Guide System.  Download Model Examples Other CAD file formats can be found here
195.00 MXN
Xtreme Solid V Wheel™ Kit Qty. 1
The OpenBuilds Solid V Xtreme Wheel is part of the heavy duty Xtreme line of OpenBuilds parts, designed with strength in mind. These solid Xtreme V's are made from very hard polycarbonate (clear) material which, due to its strong nature, will resist compression and wear and, in turn, leads to better overall precision and strength for your builds. The Xtreme V wheels are designed to be used as a heavy duty alternative to the Delrin V Wheels in applications such as CNC Routers/Mills where force and weight are introduced into the system. So, while the Delrin V Wheels work great for most light load applications the OpenBuilds Solid V Xtreme wheels can be used for builds where heavier loads are required and less compression than the delrin is desired.  The OpenBuilds Team has tested these wheels at 25lbs. per wheel with no noticeable deflection.  Beta testing resulted in unofficial results of 55lbs. per wheel! Many of these wheels could be added to a gantry to allow an even distribution of the load across them. Each wheel is carefully milled for consistent high precision and tolerance. Each Wheel Kit Includes: (1) OpenBuilds Solid Xtreme V Wheel (2) Ball Bearings - 625 2RS (2) 5mm Precision Shim (1) Lock Nut with Nylon Insert Also, be sure to grab the screws and spacers of your choice here: Low Profile Screw (25mm for use with 1/8" Plate and 30mm for 1/4" Plates) Aluminum Spacers (choose between 6mm and 1/4") Eccentric Spacers (choose between 6mm and 1/4") Note: Usually for a standard gantry plate you will need two Eccentric Spacers as well as two Aluminum Spacers   Part Details Material - Polycarbonate (clear) Dimensions 24.39 OD x 15.974 +/- 0.026 ID x 10.23 'thick' Rockwell Hardness M 75 Compressive Strengh 86Mpa   Don't forget to add your Eccentric Spacers to your order! The OpenBuilds Solid Xtreme V Wheel is great for use with the V-Slot Linear Guide System. NOTE: The installation of this V wheel is identical to the OpenBuilds V Wheel (please see videos for installation) Example Build: This is the same Solid V Wheel we are using on the OpenBuilds OX cnc router Build and would be a great upgrade for any build!
170.24 MXN
Delrin Mini V Wheel™ Kit Qty. 1
The Mini V Wheel Kit is used in conjuntion with Mini V Plate to create a small form factor linear actuator guide! These Mini V Wheels can be used on a variety of projects and are great for use with any V-Slot Extrusion. Each wheel is carefully milled for consistent high precision and tolerance. Part Details Material - Delrin (black) Dimensions 15.23 OD x 9.974 +/- 0.026 ID x 8.8 'thick' Rockwell Hardness M80 Compressive Strengh 63Mpa Each Wheel Kit Includes: (1) Mini V Wheel (2) Mini V Bearings (V3) (2) Mini V 1mm Precision Shim (1) M5 Nylon Lock Nut Also, be sure to grab the screws and spacers of your choice here: Low Profile Screw (25mm for use with 1/8" Plate and 30mm for 1/4" Plates with the exception of the C-Beam Gantry Plate & Mini V Plate which uses 25mm) Aluminum Spacers (choose between 6mm and 1/4") Eccentric Spacers (choose between 6mm and 1/4") Note: Usually for a standard gantry plate you will need two Eccentric Spacers as well as two Aluminum Spacers   Belt Driven Mini V example models Example Build Please note: Other part models in various formats can be found in the Resources/Parts section of OpenBuilds.com
99.62 MXN
Xtreme Solid V Wheel™ Qty. 1
The OpenBuilds Solid V Xtreme V Wheel is part of the heavy duty Xtreme line of OpenBuilds parts, designed with strength in mind. These Solid Xtreme V's are made from very hard polycarbonate (clear) material which, due to its strong nature, will resist compression and wear and in turn, lead to better overall precision and strength for your builds. The Xtreme V Wheels are designed to be used as a heavy duty alternative to the Delrin V Wheels in applications such as CNC Routers/Mills where force and weight are introduced into the system. So, while the Delrin V Wheels work great for most light load applications, the OpenBuilds Solid V Xtreme Wheels can be used for builds where heavier loads are required and less compression in the delrin is desired.  The OpenBuilds Team have tested these wheels at 25 lbs. per wheel with no noticable deflection.  Beta testing resulted in unofficial results of 55 lbs. per wheel! Many of these wheels could be added to a gantry to allow an for even distribution of the load across them. Each wheel is carefully milled for consistent high precision and tolerance. Includes: (1) OpenBuilds Solid V Xtreme Wheel   Part Details Material - Polycarbonate (clear) Dimensions 24.39 OD x 15.974 +/- 0.026 ID x 10.23 'thick' Rockwell Hardness M 75 Compressive Strengh 86Mpa   The Kit version of this wheel can be found here: http://openbuildspartstore.com/openbuilds-solid-v-xtreme-wheel-kit/  The OpenBuilds Solid V Wheel Xtreme is great for use with the V-Slot Linear Guide System. NOTE: The installation of this V wheel is identical to the OpenBuilds V Wheel (please see videos for installation) Example Build: This is the same Solid V Wheel we are using on the OpenBuilds OX cnc router Build and would be a great upgrade!
99.62 MXN
Xtreme Mini V Wheel™ Qty. 1
The OpenBuilds Xtreme Mini Wheel is part of the heavy duty Xtreme line of OpenBuilds parts, designed with strength in mind. These Xtreme Mini V's are made from very hard polycarbonate (clear) material which, due to its strong nature, will resist compression and wear and, in turn, leads to better overall precision and strength for your builds. The Xtreme Wheels are designed to be used as a heavy duty alternative to the Delrin Wheels in applications such as CNC Routers/Mills where force and weight are introduced into the system. So, while the Delrin Mini V Wheels work great for most light load applications, the OpenBuilds Xtreme Mini Wheels can be used for builds where heavier loads are required and less compression in the delrin is desired.  Many of these wheels could be added to a gantry to allow an even distribution of the load across them. Each wheel is carefully milled for consistent high precision and tolerance. Includes: (1) OpenBuilds Xtreme Mini Wheel The Kit version of this wheel can be found here: http://openbuildspartstore.com/mini-v-wheel-kit/ The OpenBuilds Solid V Wheel Xtreme is great for use with the V-Slot Linear Guide System.  Part Details  Material - Polycarbonate (clear) Dimensions 15.23 OD x 9.974 +/- 0.026 ID x 8.8 'thick' Rockwell Hardness M 75 Compressive Strengh 86Mpa  Download Model Examples  Other CAD file formats can be found here
79.44 MXN
Smooth Idler Pulley Wheel Qty. 1
The Smooth Idler Pulley is an Idler Free Wheel that can be used with Timing Belt up to 9mm wide! This idler pulley can be mounted in a variety of fashions to your design.  It can be plate mounted as well as direct V-Slot mounted using a tee nut and a Slot Washer. You will also need (not included) (2) Ball Bearings – 625 2RS (5mm Bore) (1) 5mm Precision Shim (1) 1/8″ Nylon Spacer (1) M5 * 25mm Low Profile Screw (1) Lock Nut with Nylon Insert     Download the SketchUp model file examples to use in your own projects! XY table Mini V Actuator Belt Driven Actuator
66.83 MXN
Polea sin dentado Smooth Idler Pulley
Este kit incluye todo para el armado de una polea sin dientes Smooth Idler Pulley para bandas de hasta 9mm de ancho! Se puede montar en diferentes configuraciones, encuentra la mejor para tí. El Kit Incluye: (1) Smooth Idler Pulley – Delrin (2) Ball Bearings – 625 2RS (5mm Bore) (1) 5mm Shim (1) 1/8" Nylon Spacer (1) M5 * 25mm Low Profile Screw (1) Lock Nut with Nylon Insert     Baja nuestro modelo en 3D para que puedas incluirlo en tus modelos. Diferentes proyectos: Mesa con movimiento en XyY Mini V Actuador Actuador de banda
190.00 MXN
Solid V Wheel™ Kit Qty. 1
The OpenBuilds Solid V Wheel is a strong wheel that resists deflection due to it's solid nature. This wheel style was produced for two reasons.- First is for builds where heavier loads are required and less compression in the delrin is desired. Many of these wheels could be added to a gantry to allow an even distribution of the load across them. - Second is for improved performance of the belt and pinion system to give the belt a flat surface to ride on. Each wheel is carefully milled for consistent high precision and tolerance. Each Wheel Kit Includes: (1) OpenBuilds Solid V Wheel (2) Ball Bearings - 625 2RS (2) 5mm Precision Shim (1) Lock Nut with Nylon Insert Also, be sure to grab the screws and spacers of your choice here: Low Profile Screw (25mm for use with 1/8" Plate and 30mm for 1/4" Plates) Aluminum Spacers (choose between 6mm and 1/4") Eccentric Spacers (choose between 6mm and 1/4") Note: Usually for a standard gantry plate you will need two Eccentric Spacers as well as two Aluminum Spacers   The OpenBuilds Solid V Wheel is great for use with the V-Slot Linear Guide System. NOTE: The installation of this V wheel is identical to the OpenBuilds V Wheel (please see videos for installation) Example Build: This is the Solid V Wheel we are using on the OpenBuilds OX cnc router Build 
122.32 MXN